Gas Chromatography refers to the process of analysis of compounds using gas chromatograph- a machine that perform the analysis of compounds after being separated from the sample and has been vaporized. A column inlet, also referred to as injector helps to take away the compounds from the sample, vaporizes and injects them in to the column of the chromatograph.
The purge and gas chromatography is normally performed to analyze the compounds which are occurring at the low parts per billion levels. It also involves a purge and trap column inlet.
Purging and Trapping
After the sample has been transported to the column inlet, either through autosampler or manually, it will undergo the following procedure for purging and trapping before being injected in to the columns of chromatograph:
The inter gas is bubbled via the sample and releases the compounds
The released compounds are trapped on an absorbent material within the concentrator
The concentrator is heater till the compound is vaporized
Once the compound gets vaporized, they are transported back again to the column on a steam of gases. This technique is called because the Mobile Phase of GC. This action concludes the purge and the trap process and then starts the chromatography process that occurs in the following manner:
The compounds firstly enter the column
Then they are passed through a liquid called stationary phase. The compounds then exit the column and enter analyzer
They are detected and identified
In the labs such processes are initiated via autosampler that shifts the sample to column inlet.
Common Applications
The most frequent and usual application for purge and trap gas chromatography is analyzing the VOCs- Volatile Organic Compounds. These are the naturally occurring elements that cause adverse health effects and environmental damage. headspace sampler to humans and animal even if consumed in smaller amounts.
They have a tendency to vaporize at room temperature that helps them pervade the environment. VOC analysis may be the best known application for GC but its not the only person. They are also being used to assess the ramifications of certain compounds on taste and smell of various foods, beverages and cosmetic products and also fragrances.
Conclusion
Purge and trap gas chromatography is useful for low level compounds in liquid and soil samples that threatened safety to environment and products. The goal of Gas Chromatography would be to analyze those compounds that are present at a low PPB level. The accuracy of the process depends on usage of right type of inlets, columns and the ones who perform the purge and trap function.
Purge and trap gas chromatography is used to evaluate low level compounds. Purge and trap equipment can be bought online or offline form suppliers at cheap prices. You’re advised to choose quality products to retain preciseness of results and process. Since the functions are based on small elements, it is very important to keep the accuracy sharp right form start.
